Module 4: Hypothesis Testing β Quiz Bank
Lesson 3: 4.1.1 Introduction to Hypothesis Testing
QUESTION 1 OF 54
What is the primary purpose of hypothesis testing in data analysis?
β
To determine if observed effects are statistically significant or due to chance
A hypothesis test judges whether a sample result is unlikely to have arisen by chance alone, relative to a significance level.
QUESTION 2 OF 54
Which of the following is NOT one of the five steps in hypothesis testing?
β
Set the Confidence Interval
The five steps are specifying the null and alternative hypotheses, setting the significance level, calculating the test statistic and P-value, and drawing a conclusion; setting a confidence interval is not one of them.
QUESTION 3 OF 54
Which of the following statements about the null hypothesis (H0) is correct?
β
It assumes no effect or no difference
H0 states there is no relationship or difference; it does not necessarily contain an inequality, is not the claim to prove, and is not limited to directional tests.
QUESTION 4 OF 54
In which scenario would you use a directional (one-tailed) alternative hypothesis?
β
Testing if a new training program increases productivity
A one-tailed alternative states a direction (increase), whereas "different from" or "unequal" are two-tailed.
QUESTION 5 OF 54
Which of the following actions increases the statistical power of a test?
β
Increasing the sample size
A larger sample reduces sampling error, lowering beta and raising power (1 - beta); more variability or a smaller sample reduces power.
QUESTION 6 OF 54
What does a Type I error represent in hypothesis testing?
β
Rejecting a true null hypothesis
A Type I error (false positive, probability alpha) is rejecting H0 when it is true; failing to reject a false H0 is Type II.
QUESTION 7 OF 54
What does the significance level (alpha) represent in hypothesis testing?
β
The probability of rejecting the null hypothesis when it is true
Alpha is the Type I error probability, the chance of rejecting a true H0.
QUESTION 8 OF 54
In a two-tailed test with alpha = 0.05, what is the area of each tail in the critical region?
β
0.025
The total rejection area of 0.05 is split equally between the two tails, 0.025 each.
QUESTION 9 OF 54
What does the standard error of the mean (SEM) represent?
β
The standard deviation of the sampling distribution of the sample mean
SEM measures how much sample means vary from sample to sample; it is not the spread of individual data points.
QUESTION 10 OF 54
Which of the following actions will decrease the standard error of the mean?
β
Increasing the sample size
SEM = sigma / sqrt(n), so a larger n lowers it.
QUESTION 11 OF 54
What happens to the width of a confidence interval when the confidence level increases (e.g. from 95% to 99%)?
β
It becomes wider
Greater confidence requires a larger range of plausible values.
QUESTION 12 OF 54
Which distribution should be used to construct a confidence interval for the population mean when the population standard deviation is unknown?
β
T-distribution
With sigma unknown, the sample standard deviation is used and the t-distribution accounts for the extra uncertainty.
QUESTION 13 OF 54
When should you use the t-statistic instead of the z-statistic in hypothesis testing?
β
When the population standard deviation is unknown
With sigma unknown (especially small samples) the sample standard deviation is used, giving a t distribution.
QUESTION 14 OF 54
What does the degrees of freedom (df) in a t-test help determine?
β
The shape of the t-distribution used for critical values
The t distribution changes shape with df (n - 1), so df selects the correct critical value.
QUESTION 15 OF 54
When is it appropriate to use the z-statistic for hypothesis testing of a single population mean?
β
When the population standard deviation is known or the sample size is large
z requires a known sigma or a large sample (n > 30) with a normal sampling distribution.
QUESTION 16 OF 54
What does the z-statistic help determine in hypothesis testing?
β
Whether the sample mean is significantly different from the hypothesized population mean
z measures how many standard errors the sample mean lies from the hypothesised mean.
QUESTION 17 OF 54
Why do businesses use hypothesis testing for population proportions?
β
To determine if a sample proportion significantly differs from a claimed population proportion
A proportion test checks claims such as defect rates or market share against sample evidence.
QUESTION 18 OF 54
What does a p-value greater than the significance level (alpha) indicate in hypothesis testing for proportions?
β
Weak evidence against the null hypothesis
If p > alpha we fail to reject H0; the sample gives little evidence against it.
QUESTION 19 OF 54
Which of the following scenarios would require a paired sample t-test?
β
Measuring employee performance before and after a training program
Before/after measurements on the same people are paired observations.
QUESTION 20 OF 54
When comparing two independent samples with unequal variances, which test should be used?
β
Welch's t-test
Welch's t-test does not assume equal variances; the pooled t-test does.
QUESTION 21 OF 54
What does failing to reject the null hypothesis imply in a two-proportion test?
β
There is not enough evidence to conclude a significant difference between the proportions
Not rejecting H0 does not prove the proportions are equal; it only means evidence of a difference is insufficient.
QUESTION 22 OF 54
What does a p-value greater than the significance level (alpha) indicate in a two-proportion hypothesis test?
β
Weak evidence against the null hypothesis
p > alpha means we do not reject H0.
QUESTION 23 OF 54
Which of the following scenarios best represents a matched sample design?
β
Measuring employee performance before and after a training program
The same participants are measured twice, so the observations are paired.
QUESTION 24 OF 54
Which statistical test is most appropriate for analyzing matched sample data involving means?
β
Paired t-test
The paired t-test works on within-pair differences.
QUESTION 25 OF 54
Which distribution is used to test the ratio of two population variances?
β
F-distribution
The ratio of two sample variances follows an F distribution.
QUESTION 26 OF 54
Why would a business use an F-test to compare two populations?
β
To evaluate whether the variability (spread) in two populations is significantly different
The F-test compares variances, not means or proportions.
QUESTION 27 OF 54
What does the F-statistic in ANOVA represent?
β
The ratio of between-group variance to within-group variance
A large F means group means differ more than chance variation within groups.
QUESTION 28 OF 54
Which of the following is a key assumption of ANOVA?
β
The variances across groups must be equal
ANOVA assumes homogeneity of variance (and normality and independence); sample means are not assumed equal and sample sizes need not be identical.
QUESTION 29 OF 54
Which Excel tool is used to perform a paired t-test?
β
t-Test: Paired Two Sample for Means
This Data Analysis tool handles paired observations.
QUESTION 30 OF 54
Which Excel function can be used to calculate the p-value for a two-tailed z-test for proportions?
β
2*NORM.S.DIST(-ABS(z), TRUE)
The two-tailed p-value is twice the lower-tail normal probability of -|z|.
QUESTION 31 OF 54
Which of the following best describes the purpose of a Chi-Squared Goodness-of-Fit test?
β
To test if observed frequencies match a hypothesized distribution
It compares observed counts with the counts expected under a hypothesized distribution.
QUESTION 32 OF 54
What does it mean if a Chi-Squared Test for Independence results in a high p-value?
β
There is not enough evidence to suggest a relationship between the variables
A high p-value means the data do not provide enough evidence to reject independence; it does not prove the variables are unrelated.
QUESTION 33 OF 54
Which Excel formula can be used to calculate the standard error of the mean from a sample?
β
=STDEV.S(data_range)/SQRT(COUNT(data_range))
SE = sample standard deviation divided by the square root of n.
QUESTION 34 OF 54
A quality analyst uses Excel's T.TEST function to compare production batches. What hypothesis is being tested?
β
Whether the average defect rates are equal
T.TEST tests whether the means of two groups are equal.
QUESTION 35 OF 54
Which statement best describes the characteristics of variables in a hypothesis?
β
Variables should be grounded in empirical realities and observable phenomena
Variables must be empirically observable and measurable.
QUESTION 36 OF 54
Why does a statistically significant result not prove that a research hypothesis is correct?
β
Because a p-value is based on probabilities, there is always a chance of making an incorrect conclusion regarding accepting or rejecting the null hypothesis (H0)
Significance is probabilistic, so Type I and Type II errors remain possible.
QUESTION 37 OF 54
What is a Confidence Interval in statistics?
β
A range of values where the true parameter is estimated to lie, based on the observed data
It is an interval estimate computed from sample data, not a guarantee.
QUESTION 38 OF 54
When the population standard deviation (s) is unknown, which estimate is used for hypothesis testing?
β
The estimate derived from the provided sample
The sample standard deviation substitutes for the unknown population value.
QUESTION 39 OF 54
What is a characteristic of matched pairs in statistical analysis?
β
Characteristics other than the one under review should differ between the paired participants
This is the key the course quiz revealed (platform feedback). Note: it is counter-intuitive, so flagged as a problematic item.
QUESTION 40 OF 54
Which of the following is NOT a characteristic of a good hypothesis?
β
Broad and all-inclusive
A good hypothesis is specific and focused, not broad and all-inclusive.
QUESTION 41 OF 54
The probability of making a Type I error is denoted by:
β
Alpha (Ξ±)
Alpha is the significance level, the probability of rejecting a true H0.
QUESTION 42 OF 54
A false negative, where a researcher fails to reject a false null hypothesis, is known as:
β
Type II error
Failing to reject a false H0 is a Type II error (beta).
QUESTION 43 OF 54
What does the level of significance (Ξ±) indicate in hypothesis testing?
β
The probability of incorrectly rejecting the null hypothesis
Alpha is the Type I error probability.
QUESTION 44 OF 54
Which of the following is TRUE regarding a 95% confidence interval?
β
95% of all possible samples will produce intervals containing the true parameter.
Confidence refers to the long-run share of intervals that capture the parameter.
QUESTION 45 OF 54
Which of the following factors can decrease the standard error of the mean?
β
Increasing the sample size
SE = s/sqrt(n), so a larger n lowers it.
QUESTION 46 OF 54
When the sample size is less than 30 and the population standard deviation is unknown, which test is preferred?
β
t-test
Small samples with unknown sigma call for the t-distribution.
QUESTION 47 OF 54
In hypothesis testing, the critical region is defined as:
β
The area beyond the critical value where the null hypothesis is rejected
It is the rejection region beyond the critical value(s).
QUESTION 48 OF 54
If the p-value from a test is 0.03 and the level of significance is 0.05, we:
β
Reject the null hypothesis
p < alpha, so H0 is rejected.
QUESTION 49 OF 54
The power of a statistical test is defined as:
β
The probability of correctly rejecting a false null hypothesis
Power = 1 - beta.
QUESTION 50 OF 54
Which of the following does NOT affect the width of a confidence interval?
β
Population size
Width depends on sample size, variability and confidence level, not on population size.
QUESTION 51 OF 54
In the context of statistical inference, population parameter refers to:
β
A characteristic of the entire population
A parameter describes the whole population; a statistic describes a sample.
QUESTION 52 OF 54
The relationship between the level of significance (Ξ±) and confidence level is given by:
β
Ξ± = 1 - Confidence Level
Confidence level = 1 - alpha.
QUESTION 53 OF 54
A hypothesis that states there is no difference or effect is called a:
β
Null hypothesis
That is the null hypothesis H0.
QUESTION 54 OF 54
If the critical value for a two-tailed test at 5% significance is Β±1.96 and the test statistic is -2.5, what should be concluded?
β
Reject the null hypothesis
|-2.5| > 1.96, so the statistic lies in the rejection region.
UNVERIFIED assessment set (attempt 101787030, scored 27/30)
3 mark(s) were lost in this attempt and the platform does not show which question, so none of these picks is confirmed.
- What is the principle on which the alternative hypothesis works? - answered: The alternative hypothesis is founded on the idea that when enough evidence is gathered from a random sample of data, it can be used to prove the researcher's assumption about the study.
- What symbol is used for the alternative hypothesis? - answered: Using less than, larger than, or not equal signs, the alternative hypothesisΓ’β¬β’ symbol is either H1or Ha.
- What is the purpose of an alternative hypothesis? - answered: The alternative hypothesis establishes that a relationship exists between two variables and that the studyΓ’β¬β’s findings are relevant and significant.
- What does the technique used for testing do? - answered: Determines whether the observed deviation is more than a defined value
- What is the difference in power between a one-sided test and a two-sided test? - answered: A one-sided test has more power than a two-sided test, but it canΓ’β¬β’t tell whether the population parameter is different in the other way.
- Why is it important to state null (Ho) and alternate (Ha) hypotheses? - answered: To test the initial research prediction quantitatively
- What is the purpose of summarizing the findings in hypothesis testing? - answered: To conclude whether the null hypothesis should be rejected
- What feature makes a one-sided test less powerful than a two-sided test? - answered: It cannot tell whether the population parameter is different in the other way.
- What common phrase indicates the structure of a hypothesis statement? - answered: When this independent variable changes
- In which section should a quick overview of the data and a summary of the statistical test results be included? - answered: The findings section
- Why is a significance level of 0.05 often used in statistics? - answered: Represents a 5% chance of finding that a difference exists when there is none
- How are critical values (CV) used in a hypothesis test to determine statistical significance? - answered: They define the line between nonsignificant and significant results
- What is the critical region in statistical testing? - answered: The range of values that corresponds to the null hypothesis being rejected at a given probability threshold
- What does the p-value describe? - answered: The strength of the evidence in the sample
- What is the significance level typically chosen for research? - answered: 0.05 or 5%
- When are findings considered statistically significant in terms of p value and significance level? - answered: If the testΓ’β¬β’s p value is less than the significance level
- What are the critical values used for in a z-test? - answered: represent the minimum distance from the null hypothesis for statistical significance
UNVERIFIED assessment set (attempt 101787066, scored 29/30)
1 mark(s) were lost in this attempt and the platform does not show which question, so none of these picks is confirmed.
- What is hypothesis testing in statistics? - answered: A method of determining whether or not the results of a survey or experiment are significant
- In what kind of situation would you use a one-sided alternative hypothesis? - answered: To establish whether the population parameter is higher than or less than the hypothesized value.
- How can the risks of Type I and Type II errors be minimized in hypothesis testing? - answered: Carefully planning the study design
- What is a hypothesis? - answered: An educated assumption that can be tested through experiment or observation.
- What is an example of a widely accepted null hypothesis? - answered: The solar system has eight planets (excluding Pluto)
- What is the purpose of an alternative theory? - answered: An alternative theory is a proposition that a researcher is testing in hypothesis testing.
- How is rejection of the null hypothesis determined? - answered: When the collected data fails to meet the null hypothesis's expectations
- What does the two-tailed hypothesis assert? - answered: According to this hypothesis, the sample proportion (denoted by Γβ¬) is not equal to a specific value which is represented by Γβ¬0.
- When is the null hypothesis rejected? - answered: When the data's p-value is less than the test's significance level
- How can the alternative hypothesis be referred to? - answered: as a counter-hypothesis to the null hypothesis
- What do significance levels indicate in statistics? - answered: How strong the sample evidence must be before results are considered statistically significant
- What is the significance level in hypothesis testing? - answered: A measure of how strong the evidence must be in the sample before one can reject the null hypothesis and declare that the impact is statistically significant
- What determines whether a statistical test is one-tailed or two-tailed? - answered: The nature of the null hypothesis and the alternative hypothesis
- What is a key reason for using the significance level in hypothesis testing? - answered: Preventing claims of existence of a false effect or relationship
- What determines the risk of making a Type I error? - answered: Significance level (alpha or)
- What is a Type I error in hypothesis testing? - answered: Rejecting the null hypothesis when it is actually true
- What is a Type II error in hypothesis testing? - answered: Not rejecting the null hypothesis when it is wrong
UNVERIFIED assessment set (attempt 101787113, scored 29/30)
1 mark(s) were lost in this attempt and the platform does not show which question, so none of these picks is confirmed.
- What is the null hypothesis principle based on? - answered: Gathering data and calculating the probability in a random sample research
- What should be included in a good hypothesis statement? - answered: Both the independent and dependent variables in the analysis.
- Why is it important to gather representative data for hypothesis testing? - answered: Statistical inferences cannot be made about the population of interest without representative data
- What is the alternative hypothesis in statistics? - answered: It indicates that two variables have a statistically significant association.
- What action must be taken when the p-value is less than the cutoff of 0.05? - answered: Reject the null hypothesis of no difference
- What can result in a Type II error despite there being an effect? - answered: Insufficient statistical power to identify a significant effect
- What is the purpose of the alternative hypothesis in a study? - answered: to show that a study's findings are meaningful and not due to chance
- What is the purpose of an alternative hypothesis? - answered: The alternative hypothesis establishes that a relationship exists between two variables and that the study's findings are relevant and significant.
- What is an example of a widely accepted null hypothesis? - answered: The solar system has eight planets (excluding Pluto)
- What is the purpose of summarizing the findings in hypothesis testing? - answered: To conclude whether the null hypothesis should be rejected
- What must happen for the null hypothesis to be rejected? - answered: P-value is smaller than the significance level
- What is the impact of reducing the significance level to 0.10 on the quantity of evidence required in a hypothesis test? - answered: The amount of evidence required may be reduced
- What do significance levels indicate in statistics? - answered: How strong the sample evidence must be before results are considered statistically significant
- What is the critical region in statistical testing? - answered: The range of values that corresponds to the null hypothesis being rejected at a given probability threshold
- In one-tailed tests, how many critical values are there? - answered: One
- What defines the probability for ranges of values in this context? - answered: sampling distribution of a test statistic
- What is a Type I error in hypothesis testing? - answered: Rejecting the null hypothesis when it is actually true