Module 2: Theory of Production and Cost β Quiz Bank
Module 2 Quizzes
(Questions from lesson quizzes, check-your-understanding sections, and the final Module Assessment)
Lesson 4: 2.1.1_Short Run vs Long Run
QUESTION 1 OF 87
Which of the following best describes the short run in production?
β
At least one factor of production is fixed
In the short run, at least one factor of production (typically capital like plant and machinery) is fixed, while variable inputs like labor can be adjusted. The other options describe characteristics of the long run (all factors variable), entry/exit conditions, or are incorrect.
QUESTION 2 OF 87
What economic principle is most relevant in the long run?
β
Returns to Scale
In the long run, all factors of production can be adjusted, making returns to scale (the relationship between proportional changes in inputs and outputs) the most relevant principle. Diminishing returns is a short-run phenomenon, law of demand relates to consumers not production, and marginal utility relates to consumer preferences.
QUESTION 3 OF 87
What does a production function show?
β
Relationship between inputs and output
A production function is defined as a mathematical relationship showing the maximum output that can be produced from a given set of inputs. It represents the technological relationship between inputs (factors of production) and output. This is the fundamental purpose and definition of a production function; cost/revenue relationships and income distribution are not its primary focus.
QUESTION 4 OF 87
If marginal product is declining but positive, then:
β
Total product is increasing at a decreasing rate
When marginal product (the additional output from one more unit of input) is positive, it still contributes to total output, so total product continues to increase. When marginal product is declining, each additional unit adds less than the previous unit, meaning the rate of increase in total product is slowing down. Therefore, total product is increasing but at a decreasing rate.
QUESTION 5 OF 87
Which equation represents the Cobb-Douglas production function?
β
Q = A Β· L^Ξ± Β· K^Ξ²
The Cobb-Douglas production function is the specific mathematical form Q = A Β· L^Ξ± Β· K^Ξ², where A is technology/total factor productivity, L is labour input with elasticity Ξ±, and K is capital input with elasticity Ξ². The other options (simple addition/division formulas) do not represent the Cobb-Douglas function structure.
QUESTION 6 OF 87
In the Cobb-Douglas production function, when Ξ± + Ξ² = 1, it indicates:
β
Constant returns to scale
When the sum of the exponents (Ξ± + Ξ²) equals 1 in the Cobb-Douglas function, the production function exhibits constant returns to scale. This means doubling all inputs exactly doubles the output, showing proportional scaling. If Ξ± + Ξ² > 1, there would be increasing returns; if Ξ± + Ξ² < 1, there would be diminishing returns.
QUESTION 7 OF 87
What does the exponent Ξ± in the Cobb-Douglas function represent?
β
Output elasticity of labour
In the Cobb-Douglas production function Q = A Β· L^Ξ± Β· K^Ξ², the exponent Ξ± represents the output elasticity of labour, meaning the percentage change in output resulting from a 1% change in labour input. It does not represent capital share (that would be related to Ξ²), technological growth rate (that's A), or substitution rate (elasticity of substitution is a different concept).
QUESTION 8 OF 87
If Ξ± + Ξ² > 1, what does the production function indicate?
β
Increasing returns to scale
When the sum of the exponents exceeds 1 (Ξ± + Ξ² > 1), doubling all inputs results in more than doubling the output, indicating increasing returns to scale and presence of economies of scale. When Ξ± + Ξ² = 1, returns are constant; when Ξ± + Ξ² < 1, returns are diminishing.
QUESTION 9 OF 87
What shape do Leontief isoquants take?
β
L-shaped
Leontief isoquants are L-shaped (with a right angle) because the production function requires inputs to be used in fixed proportions. There is no possibility of substituting one input for another, creating the characteristic L-shaped curve. Convex, straight line, and circular isoquants occur with other production functions that allow substitution.
QUESTION 10 OF 87
Which of the following is true of the Leontief function?
β
Inputs are used in fixed proportions
The defining characteristic of the Leontief production function is that inputs must be combined in specific, fixed proportions. Unlike other production functions that allow flexible substitution between inputs, the Leontief function requires rigid input ratios determined by the production technology. If either input is insufficient, production is limited by that input regardless of the availability of the other.
QUESTION 11 OF 87
The slope of the isocost line is given by:
β
- w / r
The isocost line is defined by C = wL + rK. Rearranging to slope-intercept form: K = C/r - (w/r)L. The slope is -w/r, representing the negative ratio of the wage rate (w, price of labour) to the rental rate (r, price of capital). This slope indicates the trade-off rate between labour and capital for a firm operating under a fixed cost budget.
QUESTION 12 OF 87
When the price of labor increases, the isocost line:
β
Becomes steeper
β οΈ Flagged: Initially selected "Shifts inward" which was incorrect; correct answer is "Becomes steeper"
When the wage rate (w) increases while total cost (C) and rental rate (r) remain constant, the slope of the isocost line -w/r becomes larger in absolute value (more negative), making the line steeper. The K-intercept (C/r) remains unchanged, but the L-intercept (C/w) decreases. This rotation around the K-intercept point results in a steeper line, not a simple inward shift.
QUESTION 13 OF 87
What does the slope of an isocost line represent?
β
Opportunity cost of labour in terms of capital
The slope of the isocost line (-w/r) represents how much capital a firm must give up to hire one additional unit of labour while maintaining the same total cost. This is the opportunity cost: for each unit of labour acquired, the firm sacrifices r/w units of capital. This ratio directly reflects the relative prices of inputs and the trade-off between them.
QUESTION 14 OF 87
In the isocost equation C = wL + rK, what happens when the wage rate increases, holding C and r constant?
β
The line becomes steeper
When wage (w) increases while C and r are held constant, the slope coefficient -w/r increases in absolute value, making the line steeper. The vertical intercept (C/r) stays constant, causing the line to rotate around the K-intercept point, becoming more vertical (steeper). The labour intercept (C/w) decreases proportionally, as labour is now more expensive.
QUESTION 15 OF 87
Which of the following best describes a smooth isoquant?
β
MRTS is diminishing
A smooth isoquant curves, and the slope (MRTS - Marginal Rate of Technical Substitution) changes continuously as you move along the curve, representing diminishing marginal returns to each input. Perfect substitutes have straight isoquants, not smooth ones.
QUESTION 16 OF 87
In which case would a right-angle isoquant be most appropriate?
β
Factory using one worker per machine to assemble products
A right-angle isoquant represents perfect complements (inputs used in fixed proportions). A factory requiring exactly 1 worker per 1 machine exemplifies this fixed ratio. Bakeries and farms have substitution options; software companies could substitute between hiring programmers or buying servers.
QUESTION 17 OF 87
What does a point on an isoquant curve represent?
β
Same level of output from different input combinations
An isoquant (iso = same, quant = quantity) shows all combinations of inputs that produce the same output level. This is the fundamental definition - not cost, not single inputs, not price combinations.
QUESTION 18 OF 87
Which of the following is not a property of a typical isoquant?
β
Isoquants intersect each other
Isoquants CANNOT intersect because it would contradict the property that higher isoquants represent higher output levels. All other options (slope downward, convex to origin, represent equal outputs) ARE properties of isoquants.
QUESTION 19 OF 87
At the least-cost combination, which of the following holds true?
β
MPL / MPK = w / r
At the optimal input combination, the ratio of marginal products equals the ratio of factor prices (wage for labour / rental rate for capital). This is the fundamental condition for cost minimization in production theory.
QUESTION 20 OF 87
If the wage rate increases while other factors remain constant, a cost-minimising firm will:
β
Use less labour and more capital
When wages increase, labour becomes more expensive, so the firm substitutes away from labour toward capital. This minimizes the impact of the wage increase on total costs.
QUESTION 21 OF 87
Returns to a factor is a concept that applies in the:
β
Short run when one input is variable
Returns to a factor (or law of variable proportions) describes output changes when one input varies while others remain fixed. This is a short-run phenomenon. It does not apply only in the long run, and it applies regardless of market structure, and requires that only one input be variable (not all).
QUESTION 22 OF 87
If a firm doubles all inputs and output increases more than double, it is an example of:
β
Increasing returns to scale
Increasing returns to scale (IRS) occurs when a proportional increase in all inputs results in a more than proportional increase in output. In this case, doubling (100% increase) inputs produces more than a 100% increase in output, which is the definition of IRS. Constant returns would mean exact proportional increase, and diminishing returns would mean less than proportional increase.
QUESTION 23 OF 87
The expansion path of a firm is derived from:
β
Tangency points between isoquants and isocosts
The expansion path is defined as the curve connecting tangency points between isocost lines (showing fixed total costs) and isoquants (showing different output levels). Each tangency point represents the least-cost input combination for producing that output level, with the curve formed by these points constituting the expansion path.
QUESTION 24 OF 87
A linear expansion path suggests:
β
Constant returns to scale and constant input prices
A linear expansion path indicates that the firm maintains constant returns to scale (output increases proportionally with inputs) and faces constant input prices. When the expansion path is a straight line through the origin, it means the ratio of capital to labour remains constant as the firm scales production, which occurs under conditions of constant returns to scale with stable input prices.
QUESTION 25 OF 87
In a Cobb-Douglas function, if Ξ± + Ξ² < 1, it represents:
β
Decreasing returns to scale
When the sum of exponents Ξ± + Ξ² is less than 1 in the Cobb-Douglas production function Q = A Β· L^Ξ± Β· K^Ξ², a proportional increase in all inputs results in a less than proportional increase in output, which defines decreasing returns to scale. This indicates diminishing economies of scale.
QUESTION 26 OF 87
Which of the following best describes constant returns to scale?
β
Output rises in exact proportion to inputs
Constant returns to scale occur when a proportional increase in all inputs results in the same proportional increase in output. If inputs double, output also doubles. This represents the situation where Ξ± + Ξ² = 1 in the Cobb-Douglas function, indicating no economies or diseconomies of scale.
QUESTION 27 OF 87
Which of the following functions represents decreasing returns to scale?
β
Q = L^0.3 Β· K^0.4
In the Cobb-Douglas function, when the sum of exponents Ξ± + Ξ² < 1, it represents decreasing returns to scale (0.3 + 0.4 = 0.7 < 1). The other options have exponent sums of 1.1 (IRS), 1.0 (CRS), and 1.1 (IRS) respectively.
QUESTION 28 OF 87
If inputs are tripled and output increases by less than 3 times, the firm experiences:
β
Decreasing returns to scale
When all inputs increase by 300% (tripling) but output increases by less than 300%, this is the definition of decreasing returns to scale (DRS). If output tripled exactly, it would be CRS; if more than tripled, it would be IRS.
QUESTION 29 OF 87
In the short run, the cost function includes:
β
Both fixed and variable costs
In the short run, some factors of production (capital, equipment, management) are fixed while others are variable. Therefore, a firm incurs both fixed costs (for those fixed factors) and variable costs (for those factors that can be adjusted). Only in the long run are all factors variable.
QUESTION 30 OF 87
If the total cost function is TC = 100 + 10Q, what is the marginal cost?
β
10
Marginal Cost is the derivative of the Total Cost function with respect to quantity. d(TC)/dQ = d(100 + 10Q)/dQ = 10. This constant marginal cost of 10 means each additional unit of output costs 10 to produce, regardless of quantity.
QUESTION 31 OF 87
In the short run, marginal cost intersects average variable cost at:
β
Minimum point of AVC
The marginal cost curve intersects the average variable cost curve at the lowest point (minimum) of the AVC curve. At this point, marginal cost equals average variable cost. Before this intersection point, MC < AVC (causing AVC to decrease), and after this point, MC > AVC (causing AVC to increase). This is a fundamental principle in microeconomic cost theory.
QUESTION 32 OF 87
The long-run average cost curve is:
β
An envelope of short-run average cost curves
The long-run average cost (LAC) curve is formed by connecting the minimum points of various short-run average cost (SAC) curves. Each SAC curve represents a different fixed scale of operation. The LAC curve "envelops" or touches the lowest point of each SAC curve, showing the minimum possible average cost at each output level when all factors can be adjusted. This demonstrates that long-run average costs are always equal to or lower than short-run average costs at any given output level.
QUESTION 33 OF 87
Which of the following is true about long-run cost?
β
All inputs are variable
In the long run, all factors of production are variable. The firm has sufficient time to adjust all inputs (labour, capital, materials, energy) to achieve optimal production levels and cost structures. This is fundamentally different from the short run, where at least one factor (typically capital/plant) remains fixed, creating fixed costs.
QUESTION 34 OF 87
The LRAC curve is derived from:
β
Envelope of short-run average cost curves
The Long-Run Average Cost (LAC) curve is formed as an envelope or tangent curve that touches each Short-Run Average Cost (SAC) curve at exactly one point. Each SAC curve represents a different plant size or scale of operation. The LAC curve connects the minimum points of these SAC curves, showing the minimum possible average cost at each output level when the firm has complete flexibility to adjust all factors of production.
QUESTION 35 OF 87
Which of the following is a variable cost?
β
Raw material cost
Variable costs change directly with the level of production. Raw materials, labour wages, electricity consumption, and transportation costs all vary with output quantity. Factory rent, salaries of permanent staff, insurance premiums, and equipment depreciation are fixed costs that do not vary with production volume.
QUESTION 36 OF 87
A sunk cost is:
β
A past cost that cannot be recovered
A sunk cost is money that has already been spent and cannot be recovered or changed by future decisions. Past investments in equipment, marketing campaigns, or R&D that cannot be retrieved are sunk costs. Sunk costs should not influence future business decisions because they are irrelevant to marginal analysis and forward-looking choices. Unlike variable or fixed costs, sunk costs do not affect marginal or average cost calculations for future production decisions.
QUESTION 37 OF 87
Which of the following is an example of an external economy of scale?
β
Reduced cost due to industrial cluster infrastructure
External economies of scale arise from factors external to the firm but present in the industry or geographic region. Industrial clusters (like Silicon Valley, textile hubs in India) provide shared infrastructure, specialized suppliers, and skilled labor pools that reduce costs for all firms. In contrast, labour specialisation within the firm and use of advanced machinery are internal economies, and better financial terms depend on the firm's size, not industry factors.
QUESTION 38 OF 87
A company experiencing rising unit costs due to complex communication is facing:
β
Internal diseconomies of scale
Diseconomies of scale occur when average costs rise with increased production. Internal diseconomies arise from factors within the firm (poor communication, management coordination issues, loss of control). Complex communication leading to rising costs is an internal (firm-specific) issue, not external. This is characteristic of internal diseconomies of scale that arise when a firm becomes too large to manage efficiently.
QUESTION 39 OF 87
In the short run, as output increases and the law of diminishing returns sets in:
β
Marginal cost increases
When the law of diminishing returns applies in the short run, each additional unit of variable input produces less additional output than the previous unit. Since marginal cost is the cost of producing one additional unit, and each unit requires more input due to diminishing returns, the cost per additional unit rises. Marginal cost increases as the diminishing returns effect takes hold.
QUESTION 40 OF 87
In the long run, the cost-output relationship is shown by:
β
Long-run average cost
The long-run average cost (LAC) curve represents the fundamental cost-output relationship in the long run, showing the minimum average cost for producing each output level when the firm can adjust all factors of production. The LAC curve is formed as an envelope of short-run average cost curves and is essential for understanding long-run production economics, capacity planning, and the benefits or costs of economies/diseconomies of scale.
QUESTION 41 OF 87
In the profit maximisation model, profit is maximised when:
β
Marginal revenue equals marginal cost
The fundamental condition for profit maximization is that marginal revenue (MR) equals marginal cost (MC). At this point, the additional revenue from producing one more unit equals the additional cost of producing it. Producing beyond this point adds more to costs than to revenue, reducing profit.
QUESTION 42 OF 87
If marginal cost is less than marginal revenue, a profit-maximising firm should:
β
Increase production
When MC < MR, each additional unit produced adds more to revenue than to cost, thereby increasing profit. The firm should continue producing until MR = MC. Reducing production or shutting down would not maximize profit given these cost-revenue relationships.
QUESTION 43 OF 87
According to Baumol, firms maximise:
β
Total revenue subject to profit constraint
Baumol's model proposes that oligopolistic firms maximize total sales revenue (or total revenue) rather than profit, but they must maintain a minimum profit level to satisfy shareholders and attract capital. This is fundamentally different from the classical profit maximization model. The firm seeks to maximize sales while adhering to a profit constraint, not to maximize profit first.
QUESTION 44 OF 87
Which firm behaviour best supports Baumol's model?
β
Cutting prices to boost sales, despite lower profit
Baumol's sales maximisation model predicts that firms will pursue actions that increase sales revenue even if they reduce short-term profitability, as long as the minimum profit constraint is satisfied. Cutting prices to boost sales volume exemplifies this behavior. Other options (delaying product launch, minimizing advertising, operating at minimum output) would not support sales maximisation objectives; advertising is explicitly important in the model, and sales maximisers should maximize output.
QUESTION 45 OF 87
According to Marris, managers aim to:
β
Maximise job security and firm growth
Morris proposed that managers have distinct objectives from shareholders, prioritizing job security, power, status, and salary alongside firm growth. Unlike profit maximizers or Baumol's sales maximizers, Morris's model emphasizes the dual objectives of growth maximization and protection against dismissal/takeover. Increasing product prices or minimizing capital are not central to Morris's model, and profit alone does not capture the broader managerial objectives.
QUESTION 46 OF 87
In Marris's model, equilibrium is achieved when:
β
Growth of demand equals growth of capital
Morris's sustainable growth model achieves equilibrium when the firm's demand growth (driven by advertising and new product R&D) equals the growth of its capital base. This equilibrium balances the manager's desire for growth (to enhance job security and firm size) against the takeover threat (created by reduced shareholder dividends). At this point, growth is sustainable without excessive risks or capital constraints.
QUESTION 47 OF 87
According to Williamson's model, managerial utility includes all of the following except:
β
Total profit
Williamson's model defines managerial utility as U = f(S, ID), where utility depends on salaries/perks (S) and discretionary investment (ID). Staff expenditure, managerial perks, and discretionary investments are all explicitly components of the manager's utility function. However, total profit is NOT part of the utility functionβinstead, profit serves as a constraint. Managers must maintain a minimum profit level (Ξ β) to satisfy shareholders, but total profit maximization is not their primary objective. This distinguishes Williamson's model from classical profit maximization theory.
QUESTION 48 OF 87
In Williamson's model, managers operate under:
β
Minimum profit constraint
Williamson's model presents the objective as "Maximise U = f(S, ID) subject to Ξ > Ξ β", where Ξ β represents the minimum acceptable profit level for shareholders. Unlike profit maximizers (who maximize profit), Williamson's managers maximize their personal utility while maintaining at least a minimum profit threshold to keep shareholders satisfied and prevent takeover threats. This constraint is central to the model's explanation of why managers accept lower profits in exchange for higher personal utility from salaries, perks, and discretionary investments.
QUESTION 49 OF 87
In the Orion case, increasing labour while keeping capital constant reflects:
β
Law of variable proportions
When one input (labour) increases while other inputs (capital/machinery) remain constant in the short run, we observe the Law of Variable Proportions (also called the Law of Diminishing Marginal Returns). The case study shows Prakash Manufacturing hired more workers while machinery capacity remained fixed, leading to initial productivity gains followed by diminishing returns. Eventually, marginal product per worker declined, demonstrating the law. This is characteristic of short-run production analysis where not all factors are variable.
QUESTION 50 OF 87
Investing in machinery to reduce long-run cost is an example of:
β
Capital intensification
Capital intensification refers to increasing the capital-to-labour ratio by investing in machinery and technology to reduce production costs in the long run. In the case study, Prakash Manufacturing invested in advanced machinery to enhance automation and reduce dependency on manual labour, thereby achieving economies of scale and lower average costs per unit. This long-run strategy shifts production toward capital-intensive methods rather than labour-intensive methods, illustrating capital intensification as a cost reduction strategy.
QUESTION 51 OF 87
In the short run, which factor of production is considered fixed?
β
Capital
In the short run, at least one factor (typically capital such as plant and machinery) remains fixed. Only variable inputs like labor and materials can be adjusted by firms in response to demand changes.
QUESTION 52 OF 87
What does the law of diminishing returns state in the short run?
β
Total output increases at a decreasing rate as more of a variable input is added
The law of diminishing returns explains that while total output continues to rise when additional variable inputs (labor) are added to fixed inputs (capital), the rate of increase eventually slows down. Each additional worker contributes less additional output than the previous worker.
QUESTION 53 OF 87
What does a production function show?
β
The relationship between inputs and outputs in production
A production function is a mathematical relationship that demonstrates how different combinations of inputs (labor, capital) can be transformed into outputs. It represents the technological relationship between factor inputs and production output levels.
QUESTION 54 OF 87
According to neoclassical growth theory, what is essential for economic development?
β
Capital accumulation
β οΈ Flagged: Initially selected "Technology accumulation" which was incorrect; correct answer is "Capital accumulation"
Neoclassical growth theory (Solow model) identifies capital accumulation (investment in machinery, infrastructure) as the essential driver of economic development and growth, alongside labour and technology, but capital accumulation is the specific factor this question tests.
QUESTION 55 OF 87
What is the least-cost combination in production?
β
The combination that maximises output with minimum input
β οΈ Flagged: Initially selected "The combination that minimises input with maximum output" which was incorrect; correct answer is "The combination that maximises output with minimum input"
The least-cost combination (producer equilibrium) is defined as the input combination that maximises output for a given (minimum) level of input/cost β the tangency point between the isoquant and isocost lines, where MPL/MPK = w/r.
QUESTION 56 OF 87
The general form of a production function is represented as:
β
Q = f(L, K)
The general production function expresses output (Q) as a function of Labour (L) and Capital (K), the two primary factors of production: Q = f(L, K).
QUESTION 57 OF 87
According to Marris' sustainable growth model, a higher growth rate typically results in:
β
Greater profit retention for firm expansion
Marris's model shows that pursuing higher growth requires firms to retain more profit (rather than distributing it as dividends) to fund expansion, reinvesting earnings into growth rather than maximising shareholder payouts.
QUESTION 58 OF 87
The law of diminishing returns implies that:
β
Marginal product of additional inputs eventually decreases
The law of diminishing (marginal) returns states that as more units of a variable input are added to a fixed input, the marginal product of the variable input eventually decreases, even though total output may keep rising for a while.
QUESTION 59 OF 87
Which of the following is NOT a characteristic of land as a factor of production?
β
It has a perfectly elastic supply
Land has a perfectly INELASTIC supply (fixed quantity, cannot be increased regardless of price), not an elastic one. Land is a free gift of nature, has no social cost, and exhibits diminishing returns β all true characteristics β but "perfectly elastic supply" is false, making it the correct answer to "NOT a characteristic."
QUESTION 60 OF 87
Which of the following best describes labour?
β
An inseparable factor from the worker
Labour cannot be separated from the labourer providing it β unlike land or capital, labour services are inseparable from the person performing them, which is also why labour is perishable (can't be stored) and has imperfect (not perfect) mobility.
QUESTION 61 OF 87
In the context of production, capital refers to:
β
Financial assets used to produce other goods
Capital is a man-made factor of production used to produce other goods/services, distinguishing it from land (natural resources), finished/consumer goods (which are outputs, not inputs).
QUESTION 62 OF 87
The relationship between wealth and capital is that:
β
All capital is wealth, but not all wealth is capital
Capital is a subset of wealth β specifically the portion of wealth used productively to generate further goods/services. Wealth also includes non-productive assets (e.g., jewellery, a primary residence) that are not capital.
QUESTION 63 OF 87
An entrepreneur's role in production primarily involves:
β
Organising and coordinating all factors of production
The entrepreneur's core function is the "organisation" role β bringing together land, labour, and capital and ensuring they work harmoniously to produce output, bearing the associated risk and uncertainty.
QUESTION 64 OF 87
Which of the following is NOT a characteristic of an entrepreneur?
β
Passive behaviour
Entrepreneurial qualities are all active in nature β innovation, risk-bearing, and decision-making all require proactive engagement. Passive behaviour contradicts the fundamental risk-taking, organising nature of entrepreneurship.
QUESTION 65 OF 87
The Cobb-Douglas production function is primarily used to analyse:
β
The relationship between labor, capital and output
The Cobb-Douglas function Q = AΒ·L^Ξ±Β·K^Ξ² explicitly models output (Q) as a function of labour (L) and capital (K) inputs, making it a tool for analysing how these two factors jointly determine production output.
QUESTION 66 OF 87
In a production function, 'Q' typically represents:
β
Quantity of output
In the standard notation Q = f(L, K), Q denotes the quantity of output produced, while L and K represent the input quantities of labour and capital respectively.
QUESTION 67 OF 87
The Neo-classical production function can be expressed as:
β
Y = F(K, AL)
The Neo-classical production function is Y = F(K, AL), where Y is output, K is capital, A is the technology/efficiency parameter, and L is labour β technology (A) augments the effectiveness of labour input.
QUESTION 68 OF 87
When capital and labor can substitute for each other in production, it indicates:
β
Factor substitutability
Factor substitutability describes the degree to which one input (e.g. capital) can replace another (e.g. labour) in the production process while maintaining the same output level β the defining property of smoothly-curved isoquants (as opposed to fixed-proportion Leontief production).
QUESTION 69 OF 87
Which of the following is NOT a characteristic of capital?
β
Inelastic supply
Capital has an ELASTIC supply β it can be increased over time through the capital formation process (savings and investment), unlike land which has a genuinely fixed, perfectly inelastic supply. This distinguishes capital from land as a factor of production.
QUESTION 70 OF 87
In the production process, the term "derived demand" refers to:
β
Demand for a factor due to its contribution to producing another good
Derived demand describes how the demand for a factor of production (e.g. land, labour, machinery) arises not directly, but because that factor contributes to producing a good or service that is itself directly demanded by consumers.
QUESTION 71 OF 87
What does the Cobb-Douglas production function measure?
β
The relationship between inputs (labor and capital) and output
The Cobb-Douglas function Q = AΒ·L^Ξ±Β·K^Ξ² explicitly models output as a function of labour and capital inputs, making this its core purpose.
QUESTION 72 OF 87
What is the primary difference between the short-run and long-run production?
β
In the long-run, all factors are variable
The defining distinction is that in the long run a firm can adjust every input (including capital), whereas in the short run at least one factor remains fixed.
QUESTION 73 OF 87
What does the expansion path show?
β
How the optimal input combination changes as output increases
The expansion path connects the tangency points of successive isocost/isoquant pairs, tracing how the least-cost labour-capital mix evolves as the firm scales output.
QUESTION 74 OF 87
The law of diminishing returns states that:
β
As more units of a variable input are added to fixed inputs, the marginal product of the variable input will eventually decline.
This is the precise definition β total output can still rise, but each additional unit of the variable input eventually contributes less than the one before it.
QUESTION 75 OF 87
Which of the following is not a factor of production?
β
Demand
The four factors of production are Land, Labour, Capital, and Entrepreneurship. Demand is a market concept, not a productive input.
QUESTION 76 OF 87
_____ is defined as a period of time where at least one factor of production is assumed to be in fixed supply, i.e. it cannot be changed.
β
Short run
By definition, the short run is the period in which at least one input (typically capital/plant) is fixed; the long run is when all inputs become variable.
QUESTION 77 OF 87
What is the primary characteristic of land as a factor of production?
β
It has perfectly inelastic supply
Land's total quantity is fixed by nature and cannot be increased regardless of price, making its supply perfectly inelastic β unlike capital (elastic) or labour.
QUESTION 78 OF 87
Why can two isoquants not intersect?
β
Because a single combination of inputs cannot produce two different output levels
If two isoquants crossed, the input combination at the intersection point would have to simultaneously represent two different output levels, which is a logical contradiction given a fixed production technology.
QUESTION 79 OF 87
What is the general form of a production function?
β
Q = f(L, K)
The standard notation expresses output (Q) as a function of Labour (L) and Capital (K), the two primary inputs.
QUESTION 80 OF 87
In the short run, what type of input is considered fixed?
β
Capital
Capital (plant, machinery, equipment) is the classic fixed input in the short run, while labour and materials are typically variable.
QUESTION 81 OF 87
For 8 units of output, average fixed cost is $12.50 and average variable cost is $81.25. The total cost at this output level is ______.
β
$750
Total Cost = (AFC + AVC) Γ Q = (12.50 + 81.25) Γ 8 = 93.75 Γ 8 = $750.
QUESTION 82 OF 87
What does the Marginal Product Approach suggest for cost minimization?
β
The last rupee spent on each factor should generate equal revenue
Cost minimization under this approach requires MPPa/pa = MPPb/pb = ... for all factors β the marginal return per rupee spent must be equalized across inputs.
QUESTION 83 OF 87
The expansion path is determined by the points of tangency between:
β
Isoquants and isocost lines
Each point on the expansion path is where an isocost line (fixed budget) is tangent to an isoquant (fixed output level) β the least-cost combination for that output.
QUESTION 84 OF 87
How do isoquants and isocost lines work together?
β
To determine the least-cost combination of inputs for a given level of output
Isoquants show input combinations yielding equal output; isocost lines show input combinations of equal cost. Their tangency identifies the cost-minimizing input mix for a target output level.
QUESTION 85 OF 87
How does the Leontief production function differ from other production functions?
β
It assumes that inputs must be used in fixed proportions
Unlike Cobb-Douglas (which allows substitution), the Leontief function Q = min[K/a, L/b] requires inputs to be combined in rigid, fixed ratios β no substitution is possible, producing L-shaped isoquants.
QUESTION 86 OF 87
An example of an internal economy of scale is:
β
Specialization of labor within a firm
Internal economies arise from factors within the firm's own control (specialization, bulk buying, managerial efficiency) as it grows β as opposed to external economies (shared infrastructure, regional labour pools) which come from the wider industry/region.
QUESTION 87 OF 87
How does the expansion path help a firm?
β
It shows the least-cost combination of inputs for various levels of output
The expansion path is precisely the locus of cost-minimizing input combinations across all output levels, making it a planning tool for how input proportions should scale with production.
Module 2 Assessment COMPLETE β 30/30 (100%), attempt 2 on Sonnet after a 28/30 (93.33%) Haiku attempt 1. MODULE 2 FULLY COMPLETE (lessons + assessment).