Module 1: Introduction โ Quiz Bank
QUESTION 1 OF 67
What is the primary objective of statistical analysis?
โ
Interpreting data to make decisions
Analysis goes beyond collecting or organising data โ its point is to interpret data so decisions can be made.
QUESTION 2 OF 67
Which of the following best describes statistical analysis?
โ
A method to make sense of numerical data
Statistical analysis is a systematic, quantitative method โ not a random process, a purely qualitative approach, or intuitive judgment.
QUESTION 3 OF 67
One major limitation of statistics is:
โ
It is subject to misuse
Statistical laws are not exact and can be misused; statistics never provides exact answers, does not deal with individual cases and is never claimed to be "always correct."
QUESTION 4 OF 67
Statistics is used in:
โ
Decision making in uncertain conditions
Statistics is a tool for market research, forecasting and business decisions under uncertainty โ not cooking, casual conversation or personal emotions.
QUESTION 5 OF 67
What does inferential statistics allow us to do?
โ
Predict outcomes based on sample data
Inferential statistics generalises from a sample to the population, i.e. it predicts/draws conclusions โ descriptive statistics is what merely calculates averages or lists/summarises data.
QUESTION 6 OF 67
In a dataset of exam scores: 85, 90, 95, 100, 105, what is the median score?
โ
95
With 5 ordered values, the median is the middle (3rd) value: 85, 90, 95, 100, 105.
QUESTION 7 OF 67
Which of the following is NOT a use of statistics?
โ
Building a website
Predicting behaviour, informed decisions and reducing inventory costs are all applications of statistics; building a website is a technical/development task, not a statistical use.
QUESTION 8 OF 67
Statistics is important in:
โ
Economic planning and forecasting
Statistics underpins forecasting and policy formulation (see "Forecast" and "Expectation" above); astrology, pure logical reasoning and daydreaming are not statistical applications.
QUESTION 9 OF 67
What is the primary difference between a population and a sample?
โ
A population is the entire group, while a sample is a subset of that group.
By definition, a population is every element of the group being studied; a sample is a smaller subset drawn from it.
QUESTION 10 OF 67
A sample is:
โ
A subset of the population
A sample never equals the entire group or every observation; it is drawn from, and is part of, the population.
QUESTION 11 OF 67
Which of the following graphs is best suited for comparing the frequency of different categories?
โ
Bar chart
A bar chart uses rectangular bars proportional to value/frequency, making it the standard choice for comparing counts across discrete categories.
QUESTION 12 OF 67
What is the main benefit of graphical representation of data?
โ
Provides visual insight and better understanding
Graphs and diagrams attract the eye, have more memorising effect, and give a bird's eye view of the data, conveying meaning quickly โ not reducing data size or replacing computation/collection.
QUESTION 13 OF 67
What is the IQR of the dataset [10, 12, 15, 18, 20, 22, 25]?
โ
7 (per platform answer key)
The platform marked 7 as correct despite the standard exclusive-median method giving Q1=12, Q3=22, IQR=10. Answered incorrectly twice (tried 10, then 5) before exhausting attempts; recorded here from the key so future attempts select 7 directly.
QUESTION 14 OF 67
A bar chart is used to represent:
โ
Categorical data
Bar charts compare discrete categories via bar length/height; continuous data uses histograms, time series uses line charts, and complex distributions use box plots.
QUESTION 15 OF 67
A pie chart is best used to represent:
โ
Categorical data as parts of a whole
A pie chart's slices show each category's proportional share of a total โ it isn't suited to time series, random-variable distributions, or continuous data.
QUESTION 16 OF 67
In a pie chart, all categories must:
โ
Sum up to 100%
A pie chart represents a whole, so every category's percentage slice must add up to 100% of that whole; slices are not required to be equal in size.
QUESTION 17 OF 67
A histogram displays:
โ
Frequency distribution for continuous data
Histogram bars group numerical (continuous) data into ranges/bins, with bar height showing frequency within each range โ unlike bar charts which use discrete categories.
QUESTION 18 OF 67
Histogram bars:
โ
Are adjacent to each other to show intervals
Since histogram bars represent continuous ranges with no gaps between categories, the bars touch each other to reflect the continuous nature of the intervals.
QUESTION 19 OF 67
What does a Frequency Polygon show?
โ
The shape of the data distribution
By joining the midpoints of class intervals with line segments, a frequency polygon traces the overall shape of the distribution โ it doesn't preserve exact data-point values, cumulative frequency, or the average.
QUESTION 20 OF 67
A frequency polygon is formed by:
โ
Connecting midpoints of histogram intervals with lines
The polygon is built by plotting a point at each class interval's midpoint (at its frequency height) and joining consecutive points with straight line segments.
QUESTION 21 OF 67
What does an Ogive represent?
โ
The cumulative frequency of data points
An ogive is the curve obtained by plotting cumulative (running-total) frequencies against class limits, not raw sums, means, or individual data values.
QUESTION 22 OF 67
Ogives are used to determine:
โ
Quartiles and percentiles
Because an ogive graphically represents cumulative frequency, it can be used to read off the median, quartiles, percentiles, and quartile deviation directly from the curve.
QUESTION 23 OF 67
What does a Pareto Chart help identify?
โ
The most significant issues contributing to a problem
A Pareto chart ranks causes by frequency with a cumulative-percentage overlay, making it easy to spot the "vital few" causes responsible for most of the effect.
QUESTION 24 OF 67
Pareto principle is often referred to as:
โ
80-20 rule
The Pareto principle states that roughly 80% of effects come from 20% of causes โ hence its common name, the 80/20 rule.
QUESTION 25 OF 67
What is the advantage of a Stem-and-Leaf Display over a histogram?
โ
It retains individual data points while showing distribution
Unlike a histogram which only shows bar heights per bin, a stem-and-leaf display keeps every original data value visible (as stem+leaf) while still conveying the shape of the distribution.
QUESTION 26 OF 67
In a stem-and-leaf plot, the 'stem' typically represents:
โ
Leading digits
The stem holds the leading digit(s) of each value, while the leaf holds the final digit โ e.g. for 2.3, stem "2" and leaf "3".
QUESTION 27 OF 67
What is the primary purpose of a Cross Tabulation?
โ
To compare and summarize the relationship between categorical variables
A crosstab records the frequency of cases sharing combinations of categorical characteristics, revealing how the variables relate โ not a tool for continuous data, distribution plotting, or medians.
QUESTION 28 OF 67
Cross-tabs are typically shown using:
โ
Contingency tables
A cross-tabulation is, by definition, presented as a contingency table โ a two-(or-more)-dimensional grid of frequency counts, distinct from scatterplots, line charts, or Pareto diagrams.
QUESTION 29 OF 67
Scatter plots are used to:
โ
Show relationships between two quantitative variables
A scatter plot plots paired (x, y) data points to reveal whether โ and how โ two quantitative variables are related, unlike tools for categorical comparison, normal-distribution shape, or quartiles.
QUESTION 30 OF 67
A trend line in a scatter plot represents:
โ
General direction of the data points
A trend/regression line summarises the overall pattern the scattered points follow, showing the general direction (positive, negative, or none) of the relationship rather than central tendency, noise, or frequency classes.
QUESTION 31 OF 67
What is the arithmetic mean of the following dataset: [10, 20, 30, 40, 50]?
โ
30
Sum = 10+20+30+40+50 = 150; 150 / 5 observations = 30.
QUESTION 32 OF 67
Arithmetic mean is calculated by:
โ
Adding all values and dividing by number of observations
By definition, xฬ = ฮฃx/n โ the total of observations divided by their count, not multiplication, max/min ratio, or mode.
QUESTION 33 OF 67
The median is:
โ
The value at the midpoint when data is ordered
The median is defined as the central value that splits sorted data into two equal halves โ not the mode (most frequent value), the maximum, or the least-frequent value.
QUESTION 34 OF 67
Median is preferred when:
โ
Data has outliers or is skewed
Unlike the arithmetic mean, the median is a positional average unaffected by extreme values, making it more representative when data is skewed or contains outliers.
QUESTION 35 OF 67
Which of the following datasets has a bimodal distribution?
โ
[7, 7, 8, 8, 9]
Both 7 and 8 each appear exactly twice (the maximum frequency), giving two modes โ bimodal. The other sets have a single most-frequent value or (for [1,3,5,7,9]) no repeats at all.
QUESTION 36 OF 67
A dataset with two modes is called:
โ
Bimodal
"Bi-" (two) + "modal" (mode) โ a distribution with exactly two values tied for highest frequency. Three or more tied modes would be "multimodal."
QUESTION 37 OF 67
Which of the following is the 75th percentile of a dataset?
โ
Q3
Quartile 3 (Q3) is defined as the value below which 75% of the data falls โ the 75th percentile.
QUESTION 38 OF 67
The third quartile (Q3) divides data into:
โ
75% below and 25% above
Q3 marks the point at the 75th percentile, so three-quarters of the data lies below it and one-quarter lies above it.
QUESTION 39 OF 67
The range is calculated by:
โ
Subtracting the smallest value from the largest
Range = L โ S, the difference between the maximum and minimum values in the data โ not a ratio, average, or frequency sum.
QUESTION 40 OF 67
A larger range indicates:
โ
Greater variability
Since range measures the spread between the largest and smallest values, a bigger range means the data is more spread out, i.e., more variable.
QUESTION 41 OF 67
Inter Quartile Range (IQR) is
โ
Q3 - Q1
By definition, IQR is the difference between the upper quartile (Q3) and lower quartile (Q1) โ the span containing the middle 50% of the data.
QUESTION 42 OF 67
IQR helps identify:
โ
Spread of middle 50% of data
Since IQR = Q3 โ Q1, it directly measures how spread out the central half of the data is, unaffected by extreme outliers.
QUESTION 43 OF 67
What does the Standard Deviation measure?
โ
The average distance of data points from the mean
SD is the root mean square deviation of values from their mean โ a summary of how far, on average, observations spread from the average, not a sum, central tendency, or count.
QUESTION 44 OF 67
Variance is:
โ
Square of standard deviation
Variance is defined as the average of squared deviations from the mean; since SD is the square root of variance, variance = SDยฒ.
QUESTION 45 OF 67
The Coefficient of Variation is useful for:
โ
Comparing the spread of two datasets with different units
CV is a unit-free (%) relative-dispersion measure, so it lets you compare variability across datasets even when they're in different units or have very different means โ unlike absolute measures like SD.
QUESTION 46 OF 67
Coefficient of Variation is:
โ
Standard deviation divided by mean
CV = (SD / Mean) ร 100 โ the standard deviation expressed as a percentage of the mean, not the inverse ratio or any range/IQR-based measure.
QUESTION 47 OF 67
In retail, standard deviation can help:
โ
Analyze demand volatility
SD quantifies how much demand fluctuates around its average, letting retailers gauge and plan for demand volatility โ not for pricing, sentiment tracking, or design tasks.
QUESTION 48 OF 67
In manufacturing, low variability in measurements indicates:
โ
High quality and consistency
Low variability means output measurements cluster tightly around the target, reflecting a well-controlled process and consistent product quality.
QUESTION 49 OF 67
If a business uses median income to classify customers, it is likely because:
โ
It reduces outlier impact
The median is a positional average unaffected by extreme values, so using it (rather than the mean) prevents a few very high or low incomes from skewing the classification.
QUESTION 50 OF 67
A company used CV to compare sales performance across regions. Why?
โ
To analyze relative consistency across different averages
CV is a normalised (unit-free) measure of dispersion, so it lets the company compare consistency of sales performance across regions even when their average sales levels differ.
QUESTION 51 OF 67
What are the characteristics of a good average?
โ
It is not affected much by sampling fluctuations
Marked correct by the LMS - this attempt scored 30/30, so every answer in the set is confirmed.
QUESTION 52 OF 67
Which measure of central tendency represents the middle number in a sorted list of numbers?
โ
Median
Marked correct by the LMS - this attempt scored 30/30, so every answer in the set is confirmed.
QUESTION 53 OF 67
Which measure of central tendency is the average of the numbers?
โ
Mean
Marked correct by the LMS - this attempt scored 30/30, so every answer in the set is confirmed.
QUESTION 54 OF 67
What distinguishes a population mean from a sample mean in statistics?
โ
A population mean represents the complete group being studied, while a sample mean is derived from a subset of that group.
Marked correct by the LMS - this attempt scored 30/30, so every answer in the set is confirmed.
QUESTION 55 OF 67
In which type of distribution are the mode, median, and mean all the same?
โ
normal distribution
Marked correct by the LMS - this attempt scored 30/30, so every answer in the set is confirmed.
QUESTION 56 OF 67
Which is the only measure of central tendency that can be applied to nominal data with completely qualitative category assignments?
โ
Mode
Marked correct by the LMS - this attempt scored 30/30, so every answer in the set is confirmed.
QUESTION 57 OF 67
What is essential in planning and decision-making according to statistics?
โ
Analyzing trends
Marked correct by the LMS - this attempt scored 30/30, so every answer in the set is confirmed.
QUESTION 58 OF 67
What is a pie chart used to illustrate? ata set. ~total number of observations divided by the total number of measurements in the data set. }
โ
A numerical proportion.
Marked correct by the LMS - this attempt scored 30/30, so every answer in the set is confirmed.
QUESTION 59 OF 67
Which measure is influenced by outlier values because it involves the actual numerical values in the data set?
โ
mean
Marked correct by the LMS - this attempt scored 30/30, so every answer in the set is confirmed.
QUESTION 60 OF 67
What is the number most frequently seen in a dataset called?
โ
Mode
Marked correct by the LMS - this attempt scored 30/30, so every answer in the set is confirmed.
QUESTION 61 OF 67
What does the mean do in terms of including values in a data set?
โ
Includes every value in the data set as part of the calculation
Marked correct by the LMS - this attempt scored 30/30, so every answer in the set is confirmed.
QUESTION 62 OF 67
What does the Greek capital letter รยฃ represent in the context of central tendency?
โ
Sum of...
Marked correct by the LMS - this attempt scored 30/30, so every answer in the set is confirmed.
QUESTION 63 OF 67
What does the value of the standard deviation indicate about the distribution?
โ
It indicates how evenly the values are distributed around the mean.
Marked correct by the LMS - this attempt scored 30/30, so every answer in the set is confirmed.
QUESTION 64 OF 67
What is the median from the series: 25, 15, 23, 40, 27, 25, 23, 25, 20?
โ
25
Marked correct by the LMS - this attempt scored 30/30, so every answer in the set is confirmed.
QUESTION 65 OF 67
In a set of 10 numbers, if the mode is 12 and the median is 15, what is the mean?
โ
16.5
Marked correct by the LMS - this attempt scored 30/30, so every answer in the set is confirmed.
QUESTION 66 OF 67
What does a good measure of dispersion measure in numerical terms?
โ
The extent of the scatter of the values around the average
Marked correct by the LMS - this attempt scored 30/30, so every answer in the set is confirmed.
QUESTION 67 OF 67
A student's grades in three subjects are 80, 90, and 70 respectively. If the weights assigned to these subjects are 2, 3, and 1, what is the weighted mean grade?
โ
83.3
Marked correct by the LMS - this attempt scored 30/30, so every answer in the set is confirmed.