Module 4: Cost and Management Accounting โ Quiz Bank
Lesson 3: 4.1.1 Cost & Management Accounting - Introduction
QUESTION 1 OF 56
What is the key benefit of costing accounting?
โ
Provides cost data in regard to materials, labour, overheads and expenses.
Cost accounting exists to supply detailed cost data for pricing, control and decisions; the other options are drawbacks, not benefits.
QUESTION 2 OF 56
Which of the following is NOT related to management accounting?
โ
Historical approach
Management accounting looks forward (decision making, cause-and-effect analysis, no static conventions); a purely historical approach belongs to financial accounting.
QUESTION 3 OF 56
The choice of one course of action is given by rejecting the other is called _____.
โ
Opportunity cost
Opportunity cost is the benefit foregone by choosing one alternative over another.
QUESTION 4 OF 56
An ___ occurs when one foregoes an alternative action but does not make an actual payment.
โ
Implicit cost
Implicit costs are opportunity costs of using owned resources; no cash payment is made, unlike explicit costs.
QUESTION 5 OF 56
Which of the following is the most important component of total cost, constituting the highest percentage of total cost?
โ
Prime cost
Prime cost (direct material + direct labour + direct expenses) is usually the largest part of total cost.
QUESTION 6 OF 56
Which of the following is NOT an advantage of a cost sheet?
โ
Acts as an agent to manufacturer
A cost sheet shows total and per-unit cost, helps control cost and supports a profitability policy; it does not act as an "agent" for the manufacturer.
QUESTION 7 OF 56
A company incurs: Direct materials Rs 40,000, Direct labour Rs 25,000, Factory overheads Rs 15,000, Administrative expenses Rs 10,000. What is the total production cost?
โ
Rs 80,000
Production cost = direct material + direct labour + factory overhead = 40,000 + 25,000 + 15,000 = 80,000; administrative expenses are not part of production cost.
QUESTION 8 OF 56
A company produces 600 units. Direct material Rs 60,000, direct labour Rs 40,000, factory overheads Rs 50,000. What is the total cost per unit?
โ
250
Total cost = 60,000 + 40,000 + 50,000 = 1,50,000; divided by 600 units = 250.
QUESTION 9 OF 56
If the decision is to buy from an external source, the price quoted by the supplier should be less than marginal costs; then it is called __.
โ
Make or buy decision
Comparing the supplier's price with the marginal cost of making is the make-or-buy decision.
QUESTION 10 OF 56
A company has to choose between different types of products which it can manufacture subject to a __.
โ
Key factor
A key (limiting) factor restricts output, so the firm picks the products with the best contribution per unit of that factor.
QUESTION 11 OF 56
Which of the following is NOT a limitation of CVP analysis?
โ
Plant capacity remains changes.
CVP assumes plant capacity stays the same; the other options are genuine limitations (constant capacity, difficulty forecasting profit with many products, results valid only if cost elements stay constant).
QUESTION 12 OF 56
Determination of profit at any volume of sales. The formulae are __.
โ
Volume * P/V ratio = Contribution - Fixed costs = Profit
Sales volume times the P/V ratio gives contribution; deducting fixed costs gives profit.
QUESTION 13 OF 56
SP/unit = Rs 10, VC/unit = Rs 6, Fixed costs = Rs 10,000; BEP (in units) = ?
โ
2500 units
BEP = fixed cost / contribution per unit = 10,000 / (10 - 6) = 2,500 units.
QUESTION 14 OF 56
FC = Rs 10,000, output = 10,000 units, SP/unit = Rs 10, VC/unit = Rs 6, desired profit = Rs 9,000; BEP (in units) = ?
โ
4750 units
Units needed = (fixed cost + desired profit) / contribution per unit = (10,000 + 9,000) / 4 = 4,750.
QUESTION 15 OF 56
The margin of safety as a % of sales for Firm A is __. (options 100 / 80 / 70 / 30)
โ
70
Keyed answer from the platform (the Firm A data is in an image). Flagged: my first pick, 30, was marked incorrect and the platform then revealed 70.
QUESTION 16 OF 56
The margin of safety as a % of sales for Firm A is __. (options 54 / 57.14 / 65.13 / 68.13)
โ
57.14
MoS % = (actual sales - break-even sales) / actual sales x 100 = 57.14% for the second data set.
QUESTION 17 OF 56
Which of the following is NOT an assumption of Cost Volume Profit Analysis?
โ
Change in volume are not alone responsible for changes in costs and revenues
CVP assumes volume is the only driver of cost and revenue changes, along with proportional revenue, constant product mix and a deterministic model.
QUESTION 18 OF 56
The break-even point is the point for the firm where
โ
Total revenue = Total costs
At break-even there is neither profit nor loss, so TR equals TC.
QUESTION 19 OF 56
Which of the following is NOT an advantage of the periodic inventory system?
โ
There is minimal information between the time periods, so there can be a significant adjustment at the end.
Minimal information between counts is a drawback of the periodic system; the other statements are its advantages.
QUESTION 20 OF 56
Which of the following is NOT a disadvantage of the FIFO method?
โ
Value of closing stock will reflect current market price
Under FIFO the oldest costs are issued first, so closing stock is valued at the latest prices (an advantage); the other statements are disadvantages.
QUESTION 21 OF 56
Which of the following is not the purpose of standard costing?
โ
Not assisting in setting budgets and evaluating managerial performance.
Standard costing does assist budgets and performance evaluation, and also gives predictions and challenging targets.
QUESTION 22 OF 56
Which of the following is NOT the component of variance analysis?
โ
Marketing variance
Variance analysis covers material, labour and overhead variances.
QUESTION 23 OF 56
Which of the following is NOT the reason for material price variance?
โ
No discounts received or foregone depending upon quantity bought.
Discounts do affect price; the platform key marks this statement as the odd one out.
QUESTION 24 OF 56
Which of the following is NOT the reason for material usage variance?
โ
No difference in the quality of material than planned
Usage variance arises from yield, substitutes, scrap and quality differences; "no difference in quality" is not a cause.
QUESTION 25 OF 56
Which of the following is NOT the reason for labour rate variance?
โ
Payment of no bonus (platform key; first pick "Use of skilled or unskilled labourers" was Incorrect; flagged)
Platform key as revealed after a wrong first pick.
QUESTION 26 OF 56
Which of the following is NOT the reason for labour efficiency variance?
โ
Good supervision
Platform key (good supervision would improve efficiency rather than explain an adverse variance).
QUESTION 27 OF 56
Activity based budgeting does NOT involve the following stage:
โ
underestimate the demand for organizational activities
ABB estimates (not underestimates) demand, determines required resources and estimates quantities needed.
QUESTION 28 OF 56
Budgets serve the useful purpose such as:
โ
communicating plans to the various responsibility centre managers
The other options describe criticisms of budgets.
QUESTION 29 OF 56
A ______ is a statement of planned sales in terms of quantity and value and analysed by products.
โ
sales budget
The sales budget forecasts sales quantity and value by product, area, salesman, customer type and period.
QUESTION 30 OF 56
A ______ changes with every level of activity. Budget varies according to the change in level of output.
โ
flexible budget
A flexible budget is built for different capacity levels and moves with activity; a fixed budget stays constant.
QUESTION 31 OF 56
A ______ is prepared for analyzing the financial plan for a firm with regard to investments in long lived asset.
โ
capital budget
The capital expenditure budget plans spending on fixed assets such as plant and machinery.
QUESTION 32 OF 56
Find the break even point (variable cost Rs 40 per alarm clock, fixed cost Rs 60,000, selling price Rs 60).
โ
3000 alarm clocks
BEP units = fixed cost / contribution per unit = 60,000 / (60 - 40) = 3,000.
QUESTION 33 OF 56
Find the number of alarm clocks to be sold to earn a profit of Rs 40,000 (same data).
โ
5000 alarm clocks
Units = (fixed cost + target profit) / contribution per unit = 1,00,000 / 20 = 5,000.
QUESTION 34 OF 56
Forecast wages Dec 4,800, Jan 6,000, Feb 6,400, Mar 6,800; payment lag 1/8 month. Wages payable in Jan to Mar?
โ
Rs 5,850, Rs 6,350 and Rs 6,750
Each month pays 7/8 of its own wages plus 1/8 of the previous month: Jan 5,250 + 600; Feb 5,600 + 750; Mar 5,950 + 800.
QUESTION 35 OF 56
What does the marginal cost of production include?
โ
Variable costs
Marginal cost includes all costs that vary with the production level.
QUESTION 36 OF 56
What is the purpose of break-even analysis?
โ
To calculate the amount of revenue required to break even
Break-even analysis finds the revenue needed for neither profit nor loss.
QUESTION 37 OF 56
What does the margin of safety represent?
โ
The difference between actual and break-even sales
Margin of safety = actual sales - break-even sales.
QUESTION 38 OF 56
What is inventory?
โ
Assets intended for sale
Inventory is assets intended for sale (also in production or used in producing goods).
QUESTION 39 OF 56
What does LIFO stand for?
โ
Last-In, First-Out
LIFO assumes the last units in are the first sold.
QUESTION 40 OF 56
What is calculated as: Fixed Cost / (Selling Price - Variable Cost)?
โ
Break-even Point
Fixed cost divided by contribution per unit gives break-even units.
QUESTION 41 OF 56
What does the margin of safety indicate?
โ
Buffer between sales and BEP
Margin of safety is how far actual sales exceed break-even sales.
QUESTION 42 OF 56
What is the nature of administrative costs?
โ
Non-manufacturing cost
Administration costs are not incurred in production, so they are non-manufacturing costs.
QUESTION 43 OF 56
What remains constant in total, irrespective of output?
โ
Fixed cost
Fixed cost stays the same in total within the relevant range.
QUESTION 44 OF 56
What inventory is currently under production?
โ
Work-in-progress
Partly finished goods still in production are WIP.
QUESTION 45 OF 56
Once incurred, which cost cannot be recovered?
โ
Sunk cost
A sunk cost is already spent and unrecoverable.
QUESTION 46 OF 56
Prime cost includes which of the following?
โ
Direct materials + Direct labour
Prime cost = direct materials + direct labour (+ direct expenses).
QUESTION 47 OF 56
Which of the following helps determine the relationship between cost, volume, and profit?
โ
CVP Analysis
Cost-volume-profit analysis studies exactly that relationship.
QUESTION 48 OF 56
What is the break-even point formula (in units)?
โ
Fixed Cost / (SP - VC)
BEP units = fixed cost / contribution per unit.
QUESTION 49 OF 56
What is the formula for contribution?
โ
Sales - Variable cost
Contribution = sales - variable cost.
QUESTION 50 OF 56
How is P/V ratio useful in CVP analysis?
โ
It indicates contribution margin as a percentage of sales
P/V ratio = contribution / sales x 100.
QUESTION 51 OF 56
Why is break-even analysis important for businesses?
โ
To assess risk-free output level
It shows the output level at which there is no loss.
QUESTION 52 OF 56
Why are functional budgets prepared in organisations?
โ
To control department-level operations
Functional budgets (sales, production, purchase...) control each department's operations.
QUESTION 53 OF 56
What insight does variance analysis provide to managers?
โ
Performance and cost control
Variances compare actual and standard to control performance and cost.
QUESTION 54 OF 56
What is the impact of an unfavorable labour efficiency variance?
โ
Reflects under-utilization of time/resources
More hours were used than standard, showing idle or wasted time.
QUESTION 55 OF 56
Why is break-even analysis a powerful strategic tool in CVP analysis?
โ
It identifies the minimum sales level to avoid losses
It pinpoints the minimum sales needed to avoid a loss.
QUESTION 56 OF 56
Cash budget: inflow Rs 1,00,000, fixed expenses Rs 40,000, capital purchase Rs 50,000, opening balance Rs 10,000. Closing cash balance?
โ
Rs 20,000
10,000 + 1,00,000 - 40,000 - 50,000 = 20,000.